POWER Cables

 POWER Cable

 

eos_cable.jpg

 

Eos Power Cable(Type A to B connector)

It’s long been known that the quality of mains power can have a dramatic effect on the performance of hifi & home cinema systems. A clean, quality power supply requires cables resistant to external interference and noise on the mains itself.

 

The Eos Power Cable uses OFC 2mm² conductors in a fully screened configuration.

Power management is required principally as a result of the increasingly negative impact of electical, radio frequency and electromagnetic noise pollution flooding our homes and daily life. With increasing use of high resolution audio and video content our replay equipment has come under assa ult by extraneous high energy broad spectrum noise, both airborne and directly induced through the mains supply circuits.
Wi-fi networks, BlueTooth devices, mobile & domestic cordless phones, ‘wallwart’ power adapters, low voltage light bulbs & dimmer switches are among the worst noise-generating culprits.
Eos power cables are sophisticated products designed specifically to allow your equipment to perform properly. Built around high purity low resistance OFC (Oxygen Free Copper), with low series resistance, high-efficiency dielectrics and extensive screening, Eos power cables effectively filter out harmful incoming radio frequency and power contamination, dumping these rapidly to earth.
By comparison a typical domestic power lead in comparison, lacks the quality of component parts and precise assembly we employ in Eos. For maximum effectiveness, Eos cables are best used as part of a complete Power Management System.
For a more detailed technical analysis of our power products, please refer to this white paper from our Technical Library.

 

  Construction: Triple multicore + screen / Material: OFC / Dielectric: PTFE (Teflon™) / Screen: Braid + Mylar™, 100% / Capacitance: 82.8 Pf/m / Outside Diameter: 9mm / Dielectric Strength: 1000v / Current Capacity: 20A

 

 

 

 

 Modular Power Management System

 

 

eos_dis.jpg

 

Eos Modular 4.0 Power Distribution Block

We live in an electrically noisy world. Mobile phones, computers, wireless networks, the fridge and even your equipment itself can all add various types of noise & interference. Optimum system performance demands a different approach for each component type – so the Eos Modular 4.0 mains block can combine sockets designed for higher power items (eg. amplifiers) with sophisticated filtered variants for equipment processing delicate low-level signals (eg. CD players & DACs).

 

Start with a strong foundation. The Eos Modular 4.0 block is internally wired with Atlas Eos 4dd PTFE power cable (4mm²) to ensure matched power transmission between individual socket outlets and the incoming mains supply when connected to the the wall socket with the Eos 4dd power cable.

The block is fully shielded, constructed from a welded steel chassis with anti-vibration contact damping and is configurable with optional filtered sockets. All components are of the highest quality, with the filtering circuit board being of heavy-duty design with gold-plated connections.
We use a technique called ‘Atlas ssd’ (sequential socket decoupling) to ensure that even those sockets which are not subjected to inline filtration enjoy a level of interference-free operation. The benefit is all the sockets perform and measure identically, not the case with normal domestic blocks where the sockets nearest the cable entry typically perform best because the impedance rises as resistive losses accumulate on each ‘daisy-chained’ socket.
Even the neon power indicators on conventional domestic blocks are a source of noise in themselves, which is why we don’t fit them to our blocks.
The Eos Modular 4.0 block is best used as part of a complete Power Management System, where it will maintain maximum integrity against RFI (Radio Frequency Interference and EMI (Electro Magnetic Interference).
For a more detailed technical analysis of our power products, please refer to this white paper from our Technical Library.
Dimensions: 440mm (L) x 93mm (H) x 83mm (W).

 

  Dimensions: 440mm (L) x 93mm (H) x 83mm (W)

 

 

 


 

 

제품리뷰

 

 

HI-FI Pig

   Eos Mains Block & Power Cables

 

HI-FI Choice

   Eos Modular 4.0

 

 

 

 


 

 

갤러리

 

 

 

 


  1. Analogue Interconnects

  2. USB Cables

  3. POWER Cables

  4. SPEAKER Cables

Board Pagination Prev 1 Next
/ 1